dmesg - PERC 5
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.el6.i686 (mockbuild@c6b18n3.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Tue Dec 6 16:15:40 GMT 2011
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xFCFD0
DMI: Dell Inc. PowerEdge 1950/0NK937, BIOS 1.5.1 08/10/2007
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x400000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FE0000000 write-back
5 base 220000000 mask FF0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 7000-f000
RAMDISK: 371df000 - 37fef454
Allocated new RAMDISK: 00c44000 - 01a54454
Move RAMDISK from 00000000371df000 - 0000000037fef453 to 00c44000 - 01a54453
ACPI: RSDP 000f25d0 00024 (v02 DELL )
ACPI: XSDT 000f2650 0004C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 000f2758 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT cffa8000 03C9F (v01 DELL PE_SC3 00000001 MSFT 0100000E)
ACPI: FACS cffb7c00 00040
ACPI: APIC 000f284c 000E0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 000f292d 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 000f297d 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 000f29b5 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
8074MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 0000b000 - 00011ec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000c3af70] TEXT DATA BSS ==> [0000400000 - 0000c3af70]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000c3b000 - 0000c431c4] BRK ==> [0000c3b000 - 0000c431c4]
#6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
#7 [0000c44000 - 0001a54454] NEW RAMDISK ==> [0000c44000 - 0001a54454]
#8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000]
found SMP MP-table at [c00fe710] fe710
Reserving 128MB of memory at 32MB for crashkernel (System RAM: 8960MB)
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x000000a0
0: 0x00000100 -> 0x000cffa8
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2096967
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 16149 pages used for memmap
HighMem zone: 1854101 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55
ACPI: IOAPIC (id[0x0a] address[0xfec81000] gsi_base[64])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81000, GSI 64-87
ACPI: IOAPIC (id[0x0b] address[0xfec82000] gsi_base[96])
IOAPIC[3]: apic_id 11, version 32, address 0xfec82000, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 120
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @ce000000 s34456 r0 d22888 u262144
pcpu-alloc: s34456 r0 d22888 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2079046
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=128M quiet rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:00230000)
Memory: 8161464k/9175040k available (4313k kernel code, 225016k reserved, 2412k data, 504k init, 7481000k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc0a92000 - 0xc0b10000 ( 504 kB)
.data : 0xc0836493 - 0xc0a917c8 (2412 kB)
.text : 0xc0400000 - 0xc0836493 (4313 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:2048
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 35651584 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2991.872 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5983.74 BogoMIPS (lpj=2991872)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 4 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Booting Node 0, Processors #1
Initializing CPU#1
#2
Initializing CPU#2
#3
Initializing CPU#3
Brought up 4 CPUs
Total of 4 processors activated (23938.83 BogoMIPS).
sizeof(vma)=100 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=1332 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xdce0-0xdcff]
pci 0000:00:1d.1: reg 20 io port: [0xdcc0-0xdcdf]
pci 0000:00:1d.2: reg 20 io port: [0xdca0-0xdcbf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc700000-0xfc7003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: bridge 32bit mmio: [0xf2000000-0xf7ffffff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PME# disabled
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:06:00.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:07:00.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xf4000000-0xf5ffffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:08:00.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:03.0: bridge 32bit mmio: [0xfc400000-0xfc6fffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd8000000-0xd80fffff]
pci 0000:02:0e.0: reg 10 32bit mmio pref: [0xd80f0000-0xd80fffff]
pci 0000:02:0e.0: reg 18 32bit mmio: [0xfc5e0000-0xfc5fffff]
pci 0000:02:0e.0: reg 30 32bit mmio pref: [0xfc600000-0xfc607fff]
pci 0000:02:0e.0: supports D1
pci 0000:01:00.0: bridge 32bit mmio: [0xfc500000-0xfc6fffff]
pci 0000:01:00.0: bridge 64bit mmio pref: [0xd8000000-0xd80fffff]
pci 0000:0c:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: bridge 32bit mmio: [0xfc300000-0xfc3fffff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:05:00.0: reg 10 64bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:04:00.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:11:0d.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
pci 0000:11:0d.0: reg 14 io port: [0xec00-0xecff]
pci 0000:11:0d.0: reg 18 32bit mmio: [0xfc1f0000-0xfc1fffff]
pci 0000:11:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:11:0d.0: supports D1 D2
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.PE2X._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
vgaarb: device added: PCI:0000:11:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:11:0d.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x880-0x8bf has been reserved
system 00:08: ioport range 0x8c0-0x8df has been reserved
system 00:08: ioport range 0x8e0-0x8e3 has been reserved
system 00:08: ioport range 0xc00-0xc7f has been reserved
system 00:08: ioport range 0xca0-0xca7 has been reserved
system 00:08: ioport range 0xca9-0xcab has been reserved
system 00:08: ioport range 0xcad-0xcaf has been reserved
system 00:09: ioport range 0xca8-0xca8 has been reserved
system 00:09: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
pci 0000:08:00.0: PCI bridge to [bus 09-09]
pci 0000:08:00.0: PCI bridge, secondary bus 0000:09
pci 0000:08:00.0: bridge window [io disabled]
pci 0000:08:00.0: bridge window [0xf4000000-0xf7ffffff]
pci 0000:08:00.0: bridge window [mem pref disabled]
pci 0000:07:00.0: PCI bridge to [bus 08-09]
pci 0000:07:00.0: PCI bridge, secondary bus 0000:08
pci 0000:07:00.0: bridge window [io disabled]
pci 0000:07:00.0: bridge window [0xf4000000-0xf7ffffff]
pci 0000:07:00.0: bridge window [mem pref disabled]
pci 0000:07:01.0: PCI bridge to [bus 0a-0a]
pci 0000:07:01.0: PCI bridge, secondary bus 0000:0a
pci 0000:07:01.0: bridge window [io disabled]
pci 0000:07:01.0: bridge window [mem disabled]
pci 0000:07:01.0: bridge window [mem pref disabled]
pci 0000:06:00.0: PCI bridge to [bus 07-0a]
pci 0000:06:00.0: PCI bridge, secondary bus 0000:07
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [0xf4000000-0xf7ffffff]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:06:00.3: PCI bridge to [bus 0b-0b]
pci 0000:06:00.3: PCI bridge, secondary bus 0000:0b
pci 0000:06:00.3: bridge window [io disabled]
pci 0000:06:00.3: bridge window [mem disabled]
pci 0000:06:00.3: bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 06-0b]
pci 0000:00:02.0: PCI bridge, secondary bus 0000:06
pci 0000:00:02.0: bridge window [io disabled]
pci 0000:00:02.0: bridge window [0xf2000000-0xf7ffffff]
pci 0000:00:02.0: bridge window [mem pref disabled]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
pci 0000:01:00.0: bridge window [io disabled]
pci 0000:01:00.0: bridge window [0xfc500000-0xfc6fffff]
pci 0000:01:00.0: bridge window [0xd8000000-0xd80fffff]
pci 0000:01:00.2: PCI bridge to [bus 03-03]
pci 0000:01:00.2: PCI bridge, secondary bus 0000:03
pci 0000:01:00.2: bridge window [io disabled]
pci 0000:01:00.2: bridge window [mem disabled]
pci 0000:01:00.2: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 01-03]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [0xfc400000-0xfc6fffff]
pci 0000:00:03.0: bridge window [0xd8000000-0xd80fffff]
pci 0000:0c:00.0: PCI bridge to [bus 0d-0d]
pci 0000:0c:00.0: PCI bridge, secondary bus 0000:0d
pci 0000:0c:00.0: bridge window [io disabled]
pci 0000:0c:00.0: bridge window [mem disabled]
pci 0000:0c:00.0: bridge window [mem pref disabled]
pci 0000:00:04.0: PCI bridge to [bus 0c-0d]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:0c
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [0xfc300000-0xfc3fffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 0e-0e]
pci 0000:00:05.0: PCI bridge, secondary bus 0000:0e
pci 0000:00:05.0: bridge window [io disabled]
pci 0000:00:05.0: bridge window [mem disabled]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:06.0: PCI bridge to [bus 0f-0f]
pci 0000:00:06.0: PCI bridge, secondary bus 0000:0f
pci 0000:00:06.0: bridge window [io disabled]
pci 0000:00:06.0: bridge window [mem disabled]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 10-10]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:10
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem disabled]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:04:00.0: PCI bridge to [bus 05-05]
pci 0000:04:00.0: PCI bridge, secondary bus 0000:05
pci 0000:04:00.0: bridge window [io disabled]
pci 0000:04:00.0: bridge window [0xf8000000-0xfbffffff]
pci 0000:04:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 04-05]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [0xf8000000-0xfbffffff]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
pci 0000:00:1e.0: bridge window [0xe000-0xefff]
pci 0000:00:1e.0: bridge window [0xfc100000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [0xd0000000-0xd7ffffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:06:00.0: setting latency timer to 64
pci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:00.0: setting latency timer to 64
pci 0000:08:00.0: setting latency timer to 64
pci 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:07:01.0: setting latency timer to 64
pci 0000:06:00.3: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:01:00.2: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:0c:00.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:06: resource 1 mem: [0xf2000000-0xf7ffffff]
pci_bus 0000:07: resource 1 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:08: resource 1 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:09: resource 1 mem: [0xf4000000-0xf7ffffff]
pci_bus 0000:01: resource 1 mem: [0xfc400000-0xfc6fffff]
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xd80fffff]
pci_bus 0000:02: resource 1 mem: [0xfc500000-0xfc6fffff]
pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xd80fffff]
pci_bus 0000:0c: resource 1 mem: [0xfc300000-0xfc3fffff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:05: resource 1 mem: [0xf8000000-0xfbffffff]
pci_bus 0000:11: resource 0 io: [0xe000-0xefff]
pci_bus 0000:11: resource 1 mem: [0xfc100000-0xfc2fffff]
pci_bus 0000:11: resource 2 pref mem [0xd0000000-0xd7ffffff]
pci_bus 0000:11: resource 3 io: [0x00-0xffff]
pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:01:00.0: rerouting interrupts for [8086:0370]
pci 0000:01:00.2: rerouting interrupts for [8086:0372]
pci 0000:0c:00.0: rerouting interrupts for [8086:032c]
pci 0000:11:0d.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14401k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1406897817.536:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1359
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 31B6C542CAF8AEE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 120 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 120 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x20
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc700000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.el6.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.el6.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dcc0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.el6.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dca0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.el6.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2014-08-01 12:56:59 UTC (1406897819)
Initalizing network drop monitor service
Freeing unused kernel memory: 504k freed
Write protecting the kernel text: 4316k
Write protecting the kernel read-only data: 1852k
dracut: dracut-004-256.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
radeon 0000:11:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[drm] initializing kernel modesetting (RV100 0x1002:0x515E).
[drm] register mmio base: 0xFC1F0000
[drm] register mmio size: 65536
radeon 0000:11:0d.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used)
radeon 0000:11:0d.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 348380 kiB.
[TTM] Zone highmem: Available graphics memory: 4088880 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 16M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
radeon 0000:11:0d.0: WB enabled
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 3 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
usb 1-5: new high speed USB device using ehci_hcd and address 2
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 1310720
[drm] fb depth is 8
[drm] pitch is 1280
fbcon: radeondrmfb (fb0) is primary device
usb 1-5: New USB device found, idVendor=04b4, idProduct=6560
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: configuration #1 chosen from 1 choice
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
Console: switching to colour frame buffer device 160x64
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.10.0 20080528 for 0000:11:0d.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-5.2: new full speed USB device using ehci_hcd and address 3
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata2: port disabled. ignoring.
usb 1-5.2: New USB device found, idVendor=04b3, idProduct=3016
usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2: Product: USB 1.1 2 port downstream low-power hub
usb 1-5.2: Manufacturer: Lite-On Tech
usb 1-5.2: configuration #1 chosen from 1 choice
hub 1-5.2:1.0: USB hub found
hub 1-5.2:1.0: 4 ports detected
ata1.00: ATAPI: HL-DT-ST DVD-ROM GDR-8084N, 1.01, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8084N 1.01 PQ: 0 ANSI: 5
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
alloc irq_desc for 78 on node -1
alloc kstat_irqs on node -1
megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) -> IRQ 78
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi2 : LSI SAS based MegaRAID driver
scsi 2:0:0:0: Direct-Access ATA ST1000NM0033-9ZM GA06 PQ: 0 ANSI: 5
scsi 2:0:1:0: Direct-Access ATA ST1000NM0033-9ZM GA0A PQ: 0 ANSI: 5
usb 1-5.2.3: new low speed USB device using ehci_hcd and address 4
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
scsi 2:0:8:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5
scsi 2:2:0:0: Direct-Access DELL PERC 5/i 1.03 PQ: 0 ANSI: 5
sd 2:2:0:0: [sda] 1952448512 512-byte logical blocks: (999 GB/931 GiB)
sd 2:2:0:0: [sda] Write Protect is off
sd 2:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 2:2:0:0: [sda] Attached SCSI disk
usb 1-5.2.3: New USB device found, idVendor=04b3, idProduct=301e
usb 1-5.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3: Product: IBM USB Travel Keyboard with Ultra Nav
usb 1-5.2.3: Manufacturer: Lite-On Tech
usb 1-5.2.3: configuration #1 chosen from 1 choice
input: Lite-On Tech IBM USB Travel Keyboard with Ultra Nav as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3:1.0/input/input2
generic-usb 0003:04B3:301E.0001: input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with Ultra Nav] on usb-0000:00:1d.7-5.2.3/input0
input: Lite-On Tech IBM USB Travel Keyboard with Ultra Nav as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3:1.1/input/input3
generic-usb 0003:04B3:301E.0002: input,hidraw1: USB HID v1.00 Mouse [Lite-On Tech IBM USB Travel Keyboard with Ultra Nav] on usb-0000:00:1d.7-5.2.3/input1
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [870.57 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [9.94 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
type=1404 audit(1406897821.175:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 2048 avtab hash slots, 225596 rules.
SELinux: 9 users, 12 roles, 3576 types, 179 bools, 1 sens, 1024 cats
SELinux: 81 classes, 225596 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1406897821.479:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
EDAC MC: Ver: 2.1.0 Dec 6 2011
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0xc9
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU1 sig=0x6f6, pf=0x4, revision=0xc9
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU2 sig=0x6f6, pf=0x4, revision=0xc9
platform microcode: firmware: requesting intel-ucode/06-0f-06
microcode: CPU3 sig=0x6f6, pf=0x4, revision=0xc9
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0xd2, date = 2010-10-01
microcode: CPU1 updated to revision 0xd2, date = 2010-10-01
microcode: CPU2 updated to revision 0xd2, date = 2010-10-01
microcode: CPU3 updated to revision 0xd2, date = 2010-10-01
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:8:0: Attached scsi generic sg1 type 13
sd 2:2:0:0: Attached scsi generic sg2 type 0
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
bnx2 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:05:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:05:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:15:c5:eb:fc:e9
bnx2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-mips-06-6.2.1.fw
bnx2 0000:09:00.0: firmware: requesting bnx2/bnx2-rv2p-06-6.0.15.fw
bnx2 0000:09:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:15:c5:eb:fc:eb
ses 2:0:8:0: Attached Enclosure device
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 10420216k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:10420216k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
alloc irq_desc for 121 on node -1
alloc kstat_irqs on node -1
bnx2 0000:09:00.0: irq 121 for MSI/MSI-X
bnx2 0000:09:00.0: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
alloc irq_desc for 122 on node -1
alloc kstat_irqs on node -1
bnx2 0000:05:00.0: irq 122 for MSI/MSI-X
bnx2 0000:05:00.0: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
fuse init (API version 7.13)
bnx2 0000:05:00.0: irq 122 for MSI/MSI-X
bnx2 0000:05:00.0: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
bnx2 0000:05:00.0: irq 122 for MSI/MSI-X
bnx2 0000:05:00.0: eth0: using MSI
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
bnx2 0000:09:00.0: irq 121 for MSI/MSI-X
bnx2 0000:09:00.0: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
Uhhuh. NMI received for unknown reason 31 on CPU 0.
Do you have a strange power saving mode enabled?
Dazed and confused, but trying to continue
Bridge firewalling registered
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
type=1400 audit(1407229362.207:4): avc: denied { write } for pid=20081 comm="ssh-keygen" name="keys" dev=dm-0 ino=1841051 scontext=unconfined_u:unconfined_r:ssh_keygen_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:usr_t:s0 tclass=dir
type=1400 audit(1407229578.227:5): avc: denied { write } for pid=23635 comm="ssh-keygen" name="keys" dev=dm-0 ino=1841045 scontext=unconfined_u:unconfined_r:ssh_keygen_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:usr_t:s0 tclass=dir
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input0, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input0, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input0, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -71
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input0, status -71
usb 1-5.2: USB disconnect, address 3
usb 1-5.2.3: USB disconnect, address 4
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input1, status -110
usb 1-5: clear tt 2 (0040) error -32
drivers/hid/usbhid/hid-core.c: can't reset device, 0000:00:1d.7-5.2.3/input0, status -110
usb 1-5: clear tt 2 (0040) error -32
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 86
Raw EDID:
00 ff ff ff ff ff ff 00 4c 2d 34 09 35 33 42 54 ........L-4.53BT
2f 15 01 03 68 30 1b 78 2a d1 11 a5 55 55 a0 28 /...h0.x*...UU.(
0d 50 54 bd ef 80 71 4f 81 c0 81 00 81 80 03 ff .PT...qO........
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:05:00.0: eth0: NIC Copper Link is Down
bnx2 0000:05:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON